Allflex AFX-100 Manuale Utente Scaricare il pdf (Pagina 20)

Figure 3 - Stick Reader Power Jack and Data Connector Wiring

Diagram

Serial output data appears on the Stick Reader‟s TxD/pin 2 connection in

ASCII format, which is compatible with most PC terminal emulator

programs, such as HyperTerminal®.

Table 3 - Default Serial Data ID Code Formats

Tag Type

Default Format

HDX ISO

LA_982_000001088420{CR}{LF}

HDX

Industrial

LR_0006_0000000018514243{CR}{LF}

FDX-B ISO

LA_982_000000255895{CR}{LF}

Note: _ = space; {CR} = carriage return; {LF} = line feed

Interpreting Tag ID Code Information

Table 3 lists the default data formats that are transmitted from the Stick

Reader‟s serial communications port, in response to reading compatible type

tags. For ISO type tags, there is no contextual differentiation between HDX

and FDX-B outputs. Both types of tags produce a default format:

LA_982_000001088420{CR}{LF}

Connect the wand to the PC via the serial cable and computer serial port.

Start the Configurator software and turn on the reader. The readers current

settings will appear on the screen. If they don‟t click on Get Settings.

The Configurator has several TABS across the top section.

Select the “Wireless Technologies” screen by clicking on the

Wireless Technologies tab.

The Stick Reader settings must be set to the following:

Power Module: On;

Connection Mode: Master;

Device Pairing: On;

Pairing Slave ID; use the address code found on the small label on

the Blue Tooth Adapter that attaches to the scale head. The code will

usually look something like this: 000BCE0076A3

To Stick

Reader

+ Pwr

TxD

RxD

Gnd

#20

AWG

#26

AWG

Aux

DB9(F)

2.5mm

Coaxial Jack

1 2 ... 15 16 17 18 19 20 21 22

Commenti su questo manuale

Nessun commento

Allflex AFX-100 Manuale Utente Pagina 20

Commenti su questo manuale